Part Inventory - Your Yealink box should include the following items.
- (A) Quick Start Guide/Manual
- (B) Yealink Base
- (C) Cordless Handset
- (D) Ethernet Cord
- (E) Yealink Base Power Cord
- (F) Handset Clip
- (G) Handset Resting Cradle
- (H) Handset Cradle Power Cord
- (I) Handset Battery
Charge Phone
- (A) Battery - Insert battery into the back of the handset.
- (B) Connect - Connect the handset resting cradle to the power adaptor.
- (C) Plug in - Plug the power adaptor into the wall outlet.
Step 3: Plug in Yealink Base Near Modem
A. Connect power cord to Yealink Base
B. Plug Yealink base power cord into outlet near the modem.
C. Modem Examples
Step 4: Connect Yealink Base to Modem
A. Take the ethernet cord (yellow cord in this picture, could be any color) and plug it into the Yealink Base
B. Plug the other end into the back of the modem in any open ethernet space.
Step 5: Confirm 3 Green Solid Color Lights on Bottom Right of Yealink Base
If there are not 3 solid colored lights, try plugging it into a different ethernet space, or, try plugging it into a different modem if you have more than 1.
Step 6: Retrieve IP Address From Handset
Press ‘OK’ 3 times on the handset. Please note the IP address at the top.
Step 7: Check That IP is valid
Input IP Address in browser address bar with all of the periods. Then press enter. If your Yealink Base/Phone was connected correctly, you should see a login box appear on your screen. If you see the login box, you’re all set!
Step 8: Contact CallPotential Support
Go to www.callpotential.com and click the chat button to reach our support team. Be sure to have your IP Address available to share with the agent and they will work with you to complete the phone configuration.
