Part Inventory - Your Yealink box should include the following items.
- (A) Quick Start Guide/Manual
- (B) Yealink Base
- (C) Cordless Handset
- (D) Ethernet Cord
- (E) Yealink Base Power Cord
- (F) Handset Clip
- (G) Handset Resting Cradle
- (H) Handset Cradle Power Cord
- (I) Handset Battery
Charge Phone
- (A) Battery - Insert battery into the back of the handset.
- (B) Connect - Connect the handset resting cradle to the power adaptor.
- (C) Plug in - Plug the power adaptor into the wall outlet.
Plug in the Yearlinke Base Near Your Modem
- (A) Power - Connect the power cord to the Yealink Base.
- (B) Plug in - Plug the Yealink base power cord into an outlet near your modem.
- (C) Modem Examples
Connect Yealink Base to Modem
- (A) Yealink Base - Take the Ethernet cord (yellow cord in this picture, but could be any color) and plug it into the Yealink base.
- (B) Modem - Plug the other end of the Ethernet cord into any open modem port.
Confirm Connection
- 3 Solid Lights - Confirm there is a working internet connection with these 3 solid lights on your Yealink base. If they are not solid (blinking) or don't all appear, try using a different modem port. If that doesn't work, try a different modem if you have more than 1.
IP Address
- Retrieve the IP Address from your Handset - Press 'OK' 3 times on the handset. Note the IPv4 address at the top.
Validate IP Address
- Check that the IP Address is Valid - Input the IP address from your handset into Google Chrome's address bar, including all the periods, and press 'Enter'.
- Login Box - If your Yealink Base/Phone was connected correctly, you should see a login box appear on your screen.
CallPotential Support
- Contact CallPotential Support - Be sure to have your IP address available to share with the agent and they will work with you to complete the phone configuration.
